By far the most overlooked gadgets in our homes in recent times is the hot water heater, or hot water tank. It is something often ignored until something fails. It is generally on a frosty winter day when you turn on the shower longer than usual and notice there is no hot water. This is when we run around in a panic looking for the closest heating company to deal with the problem.
Hot Water Tank Life Extension Advice
Frequently, a gas-powered hot water tank lasts an average of twelve years. A substitute tank can be purchased at a community hardware store when it’s time if you so choose. The lifetime of these heaters may be extended either with an insulation jacket or by making certain the calcium debris in the tank are kept clean. You want to keep up with either one or both pointers to be sure that it’s going to be as durable as it can be.
Even though it makes logical sense that old hot water tanks must be changed from time to time, you may wonder if it is required to get it done before it pops a leak.
Replacing The Water Heater Saves Money
Obviously, the most recognized advantage of getting a new heater can be saving cash on the utility bill. New hot water tanks improve constantly and you could expect a new one to be way more efficient than the outdated one. There are some things to consider with your new purchase if you desire to capitalize on your savings and that is how much use it will be exposed to.
An well informed heating specialist can help you work out the size and capacity of this new water heater determined by the number of individuals in your house. After all, more people in the house means more hot water usage.
Types of Hot Water Tanks
Water heaters are really in two main groups; Natural Gas and Electric. Gas appliances are more expensive than electric units – a typical gas heater would usually cost about $800, as electric models can be roughly the same, but in general slightly less. Some of us are still opting for the conventional hot water tank as it’s what we are most familiar with, but on-demand water heaters are getting very popular, so you’ll want to consider both before you make an investment.
Whether you prefer a electric or gas powered water heater, you can select instant hot water with what is referenced as the on-demand water heater system. Or if you might be more inclined to buy into green power you can find solar powered water heaters, which will diminish emissions older water heaters are well-known for. Just bear in mind the installation difficulties you’ll encounter with a solar heating unit, so be prepared to pay those extra installation fees.
Regardless of what type you select for a new hot water tank, it’s best to take a close look at hiring the services of a heating service for the work. This kind of job involves an expertise in local heating codes and suitable ventilation of fumes for gas units. If you are unfamiliar in that kind of work then don’t endanger your resources or your family members safety with a shoddy crack at this sort of work.
Many people do not fully appreciate how important their hot water heater is until it malfunctions and everyone in the house is taking cold showers. These household items usually found in our garages or basements are the mechanisms that heat all of water for us to have it available in our sinks, kitchens, and bathtubs. They are made to last for a long time if they are maintained properly. The following will outline three steps you can do, as a homeowner, to maximize the life of your water heater.
Check the Temperature and Lower the Level
Take a look at your hot water heater’s temperature gauge. It should be somewhere between 115 and 120 degrees. Lower the temperature a little bit. Doing some will not only keep this device from overheating but will save you money on your monthly utility bills.
Test the Pressure Relief Valve
This is an easy way to see if your water heater will have to be replaced soon or not. Locate the pressure relief valve and lift it halfway. It should automatically snap back to its original position. You should also hear some sort of noise as water is released back down the drain tube. In the event that this valve does not work then you know you will have to start looking for a replacement.
As a hot water heaters is running small deposits build up at the bottom of the tank. In time becomes a recipe for corrosion and rusting. You cannot do a total flush in most cases because the whole whole system must be turned completely off and the water tank must be completely full.
Here is how one can do a partial flush. Put some type type of container (like a bucket) under the drain valve. It is located at the bottom of the hot water tank. Turn the valve counter clockwise. The heater will proceed to release water into the container. It will not be more than a few gallons.
Make absolutely certain that you turn the power off if you have a water heater that runs off electricity. It can be a huge safety issue if you do not. If any of the connections are damaged in any way then you should call a technician for hot water tank replacement.
If you have a gas water heater make certain the gas is off and pilot light is not on before you do anything.
These are basic steps that you can do once or twice per year to make sure your hot water heater is running as optimal as it possibly can. If you have any problems are cannot do it yourself make certain you call a local plumber in the area to take care of it for you.
KCs Plumbing and Heating Ltd
Vancouver, BC V5N 2S7